itel it2163 flash file qazigsm

 Card found : BE969285 , v0153

Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.02

SCRD mode : AUTO

SPRD mode : SC6530 : REV : 0000 : NOR

SPRD mode : SC6531 : REV : E000 : NOR

Operation : Format FileSystem [ v1.02 ]

1. Power off device

2. Press and hold BootKey or use BootCable

3. Insert cable and battery in device!

Wait for device ... 

Device Connected!

BootVersion : SPRD3

BootSource  :  InternalLibrary

BootVersion : Infinity SCR SC6531E Loader v 1.2

Port speed : 921600

FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data

Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_1290D21519C6_NVM.nv

Executing FormatFFS ... 

Format FFS Done!

Done!

Elapsed: 00:00:22

Reconnect Power/Cable!

Operation : Write Flash [ v1.02 ]

1. Power off device

2. Press and hold BootKey or use BootCable

3. Insert cable and battery in device!

Wait for device ... 

Device Connected!

ERROR : Protocol HandShake failed!

Error : Fail to init protocol!

Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Write Flash [ v1.02 ]

1. Power off device

2. Press and hold BootKey or use BootCable

3. Insert cable and battery in device!

Wait for device ... 

Device not found!

Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Read Flash [ v1.02 ]

1. Power off device

2. Press and hold BootKey or use BootCable

3. Insert cable and battery in device!

Wait for device ... 

Device Connected!

ERROR : Protocol HandShake failed!

Error : Fail to init protocol!

Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Read Flash [ v1.02 ]

1. Power off device

2. Press and hold BootKey or use BootCable

3. Insert cable and battery in device!

Wait for device ... 

Device Connected!

BootVersion : SPRD3

BootSource  :  InternalLibrary

BootVersion : Infinity SCR SC6531E Loader v 1.2

Port speed : 921600

FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Ok!

Saved to : C:\Users\qazi azam\Documents\FLASH_DUMP1.bin

Done!

Elapsed: 00:00:58

Reconnect Power/Cable!

Download